Ubiquiti UniFi switch Gen2 USW-EnterpriseXG-24 Layer3 24x 10Gbps + 2x SFP28

Technical SpecificationsMechanical Dimensions 442 x 285 x 44 mm (17.4 x 11.2 x 1.7") Weight Without mounting brackets: 4.5 kg (9.9 lb) With mounting brackets: 4.6 kg (11 lb) Enclosure material SGCC steel Hardware Management interface Ethernet In-Band Networking interface (24) 1/2.5/5/10 GbE ports (2) 25G SFP28 ports* *Don't support mixed speed at 25 Gbps mode. Supports mixed speed when all ports are at 1 or 10 Gbps. Once one of the ports is configured at 25 Gbps mode, the others will be limited at 25 Gbps too.

power consumption 100W Services SMB Layer 3 GbE switch ESD/EMP protection Air: ± 16kV, contact: ± 12kV LCM display (1) 1.3" color touchscreen Button Factory reset Ambient operating temperature -5 to 40° C (23 to 104° F) Ambient operating humidity 10 to 95% noncondensing Certifications CE, FCC, IC Switching FeaturesLayer 2 features IGMP snooping STP / RSTP with priorities and port-level disable Port isolation Storm control Voice VLAN Port mirroring LACP port aggregation Multicast / broadcast rate limiting MAC address blocking Flow control 802.1X control Jumbo frames Proprietary loop protection DHCP snooping / guarding Egress rate limit LLDP-MED Port restricted by MAC Device isolation with ACLsLayer 3 features DHCP for locally-managed networks DHCP relay Inter-VLAN routing between networks on same switch Static routing between local networks Network isolation with ACLs LEDs System Status Ethernet Link/activity Application Requirements UniFi Network Version 6.1.67 and later Total non-blocking throughput 290 Gbps Switching capacity 580 Gbps Forwarding rate 431.52 Mpps Power method (1) Universal input, 100—240V AC, 2A Max., 50/60 Hz (1) USP-RPS DC input, 11.5V DC, 8.7A Power supply AC/DC, internal, 100W Supported voltage range 100—240V AC Max.