Ubiquiti UniFi switch Gen2 USW-PRO-MAX-24-POE Layer3 16x 1Gbps 8x 2,5Gbps + 2x SFP+ POE++ (400W)
Technical Specifications Mechanical Dimensions 442 x 325 x 44 mm (17.4 x 12.8 x 1.7") Weight Without mounting brackets: 5.1 kg (11.3 lb) With mounting brackets: 5.2 kg (11.5 lb) Enclosure material…
Specifikacia Ubiquiti UniFi switch Gen2 USW-PRO-MAX-24-POE Layer3 16x 1Gbps 8x 2,5Gbps + 2x SFP+ POE++ (400W)
Technical Specifications Mechanical Dimensions 442 x 325 x 44 mm (17.4 x 12.8 x 1.7") Weight Without mounting brackets: 5.1 kg (11.3 lb) With mounting brackets: 5.2 kg (11.5 lb) Enclosure material SGCC steelHardware Management interface Ethernet In-Band Networking interface (16) GbE RJ45 ports (8) 1/2.5 GbE RJ45 ports (2) 10G SFP+ ports PoE interface (8) PoE/PoE+ (Pins 1, 2+; 3, 6-) (16) 60W PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-) Total non-blocking throughput 56 Gbps Switching capacity 112 Gbps Power method (1) Universal input, 100—240V AC, 50/60 Hz (1) USP-RPS DC input Power supply AC/DC, internal, 450W Supported voltage range 100—240V AC Max. power consumption 50W (Excluding PoE output) Total available PoE 400W Max. PoE wattage per port by PSE PoE: 15.4W PoE+: 30W PoE++: 60W Voltage range PoE mode PoE: 44—57V PoE+: 50—57V LCM display (1) 1.3" touchscreen Button Factory reset Ambient operating temperature -5 to 40° C (23 to 104° F) Ambient operating humidity 10 to 90% noncondensing Certifications CE, FCC, IC Switching FeaturesLayer 2 features IGMP snooping STP / RSTP with priorities and port-level disable Port isolation Storm control Voice VLAN Port mirroring LACP port aggregation Multicast / broadcast rate limiting MAC address blocking Flow control 802.1X control Jumbo frames Proprietary loop protection DHCP snooping / guarding Egress rate limit LLDP-MED Port restricted by MAC Device isolation with ACLsLayer 3 features DHCP for locally-managed networks DHCP relay Inter-VLAN routing between networks on same switch Static routing between local networks Network isolation with ACLs Etherlighting™ Ethernet Locating Speed/link Native VLAN/network SFP+ Locating Speed/link Native VLAN/network LEDs System Status RPS Status Application Requirements UniFi Network Version 8.0.24 and later
